iHeir-JP anti-mold agent immersion type
After soaking of bamboo, wood, rattan grass does not grow mold in a humid environment!
iHeir-JP bamboo and wood ant-mold agent immersion type is a new high-efficiency special anti mildew preservative for wood newly developed by our company, which can inhibit and kill bacteria, fungi, moths and molds caused by mold spores. It has a series of advantages such as high content, anti loss, strong penetration, high adhesion, moisture resistance and long antibacterial cycle. It is mainly used for anti-corrosion, mildew and moth proof treatment of sawn timber, wood, bamboo, plants and other materials.
Physical and chemical indicators
Low viscosity liquid with pungent odor
Quaternary Ammonium Salt
Concentration of active ingredients
Refractive index 78.8℉(26℃)
Flash point the temperature
Fog point temperature
It can be miscible with any proportion of water, alcohols, ketones, esters, hydrocarbons, and chlorinated hydrocarbons
At 257 ℉ (125 ℃), the following is stable
Can withstand circular frozen 10 times （0℃-122℉/-17.7-50℃)
Of bamboo, wood, plant growth of mold, algae, and yeast has inhibitory effect
Safety of iHeir-JP
In order to verify the security of iHeir-JP, underwent 15 project test
Acute oral toxicity (guinea pig)
Acute percutaneous toxicity (rabbit)
Eye mucosa irritation (rabbit)
Skin irritation (rabbit)
Toxicity of fish (red trout and salmon)
Human skin contact test (black, white and yellow)
Subacute toxicity by skin contamination (rabbits)
Acute inhalation toxicity (guinea pig)
Sudden variability (histidinogenesis of bacteria that live on mice)
Germination (guinea pig)
Cytoplasmic transformation (field-vole cultured cells/ no metabolic activity)
Cytoplasmic transformation (field-vole cultured cells/ with metabolic activity)
Acute oral toxicity (wild duck)
Oral toxicity of the feed (wild duck)
Transdermal absorption (rabbit)
Some experimental data(Acute oral toxicity)
The toxicity of iHeir-JP is very low, and the LD50 of the guinea pig is 12.27g/Kg. This value represents the median lethal dose of the guinea pig is 12.27 g per kg (in weight). Examples are given for comparison. For example, the LD50 of the Alkyl Dimethyl Benzyl Ammonium Chloride, which is commonly used in disinfection, is 0.48g/Kg for guinea pig, and the LD50 of the sorbic acid, which is an additive for food preservation, is 10.5g/Kg for guinea pig. The LD50 of the salt we eat every day is 3.0g/Kg. In fact, iHeir-JP is remarkably safe.
iHeir-JP bacteriostatic concentration of microorganisms
Name of bacterial species
Minimum inhibitory concentration /MIC（ppm）
Main applications of iHeir-JP
It is suitable for preventing insects and mildew problems of bamboo products, and wood, rattan, awn, kwai grass, and grass products.
Roof materials (namely, roof board, roof pillar material, shingle board, and wood square).
It can be widely used to protect outdoor bamboo wooden house, wooden floor, outdoor wooden fence, wooden building, wooden carving products, and wooden craft products.
Using Methods of iHeir-JP
为保证竹、木、藤、草及其制品处理后的防霉防虫效果，用iHeir-JP 药水浸渍应使竹、木、藤、草及其制品在浸渍后增重 15%-20%（大约 5—10 分钟）。备注:浸泡液体按照 1：20 的配制(5Kg 木材防霉剂 : 100Kg 水)。
To ensure the antifungal and insect-resistant effects of bamboo, wood, rattan, grass, and their products after treatment, the impregnation with iHeir-JP potion should increase the weight of bamboo, wood, rattan, grass and their products by 15%-20% (about 5-10 minutes) after impregnation. Note: The soaking liquid is prepared at the ratio of 1:20 (5Kg wood antifungal agent: 100Kg water).
All the bamboo, wood, rattan, grass, and their products are immersed in the prepared potion (Do not come out of the water) to increase the weight by 15%-20%. Remove the drips, and dry in the air or the sun before packaging and storaging.
喷涂时按照 1:15 兑水，搅拌均匀直接在竹、木、藤、草及其制品表面喷涂或用毛刷刷上一层，药剂需要全方位覆盖木材表面。
Spray with the water at the ratio of 1:15, stir evenly, and spray or use the brush to brush a layer on the surface of bamboo, wood, rattan, grass, and their products. The agent needs to be fully covered on the surface of the wood.
The potion prepared by this product has stable property, which can be used repeatedly without having to be discarded. However, the solution should be added in time when the bamboo and wood products cannot be immersed into the solution, and the added solution should be prepared at a higher proportion.
For bamboo, wood, rattan, grass, and their products coated with light oil, iHeir-YQ paint anti-mold agent is added into the light oil after the above treatment, so that the effects can be more significant.
iHeir-JP Mould proof test instructions
Test purpose: the purpose of this test is to test the mold resistance of iHeir-JP bamboo and wood mildew inhibitor.
Test sample: wood products
试验方法：本次试验将筛选3组木制品，分别放入三个培养皿，其中两组将iHeir-JP 按照1:15和1:20的比列兑水搅拌均匀，然后均匀的喷涂在木制品的表面，另外一组为 空白样板，测试28天结束。
Test method: the test will be screening of three groups of wood, respectively in the three dishes, including two groups will iHeir – JP according to 1:15 and 1:20 than water mixing evenly, then evenly sprayed on the surface of wood, another group of blank sample, test end of 28 days.
Put the three groups of Petri dishes into a constant temperature and humidity box
Set the temperature and humidity of the constant temperature and humidity box: as shown in the figure below, the temperature is 28.2 ℃ and the humidity is 87%
On the seventh day, observe the changes: it can be seen that there are growing molds in the blank sample, and there is no change in the other two groups
Observation after 28 days: (end of experiment)
The experimental conclusion: blank sample mold cover 80%, visible to the naked eye in the other two groups did not see mold growth, prove iHeir – JP mouldproof level can reach 0 level. So reasonable use iHeir – JP bamboo mould inhibitor in mould is suitable for growth under the environment of wood nor chairman mildew.
Packaging and Storage
iHeir-JP Bamboo and wood anti-mold agent use 1Kg, 5Kg, 25Kg packaging specifications. Please put iHeir-PT bamboo anti-mold agent in the ventilated area at normal temperature. Please do not use metal container without lining to load iHeir-JP Bamboo and wood anti-mold agent. Under normal storage temperature, the product’s stability can last at least 1 year.