How to determine whether the product will not mildew ?
Walt Mart has used the anti-mold test as one of fheir QA standands.
霉测试已被 Walt Mart列为最重要的品控常规检测项目之一.
My goal is to control the moisture below 12%.
the humidity below 60%.
Our dozens of microbiological experts spent three years to do in-depth research and repeated experiments on the Yangtze River Delta, Pearl River Delta and more than 60 large and medium-sized enterprises, finally they found that：
1. The new material with heavy oil provides nutrition and food for the propagation of mildew;
2. The temperature difference between day and night during marine transportation causes condensation phenomenon”, which greatly increases the risk of damp and mildew;
3. EU strictly restricts the use of pesticides, DMF, azo heavy metals and other prohibited chemicals;
4. The promotion and use of environment-friendly water-based glue has become a breeding ground for some bacteria and mold;
How to determine whether the product will get mildew or not?
Use the mildew tester correctly. Evaluate the moldy risk in an objective way
防霉测试已被 WALT MART列为最重要的品控常规检测项目之一
The antimold test has been listed as one of the most important
routine testing items for quality control.
Digital display precision high humidity test apparatus.
Before using the tester, please read this manual carefully so that you can use it correctly and master some simple maintenance skills.
LCD digital display mildew proof tester is a precise mildew proof tester for moisture content measuring instrument of wood, bamboo products, rattan grass, leather, textiles, paper, chemical grease, cotton, handicrafts, etc. it is suitable for measuring the water content of wood, bamboo products, rattan grass, leather, textiles, paper, chemical grease, cotton, handicrafts, etc. The test method is simple, accurate and fast. It is the best choice for the process of bamboo products, rattan grass, leather, textiles, paper, chemical grease, cotton, handicrafts and other products.
探头保护罩 Probe protective cover
读数保持开关 Read value holding switch
电源开关 Power switch
液晶显示器 Liquid crystal display
电池门 Battery door
Directions for use
Press the “Power Switch” key to turn on the power, and the screen displays “00%”.
Insert the probe of the tester into the object to be measured at about 5mm, and the displayed value on the screen is the water content of the object to be measured.
Press the “H” key can lock the current reading. When the “H” symbol is displayed on the screen, press the “H” key again can cancel the reading value locking function.
After the measurement, press the “Power Switch” key, turn off the power supply, cover the probe protective cover, and the measurement is completed.
当显示器出现“- + ”符号时，说明电池电压不足，此时需要更换新的9V电池;
The measuring probe of tester is very sharp. Never use it as a toy for children to avoid injury;
Do not use the measuring probe against others to prevent injury to others;
The tester is a high resistance instrument, which requires all parts shall have good insulation. Pay attention to moisture-proof and dust-proof during storage and use, and keep it dry and clean to ensure the accuracy of measurement;
When the “- + “symbol appears on the display, it indicates that the battery voltage is insufficient. At this time, a new 9V battery needs to be replaced;
If it is not used for a long time, the battery should be taken out to avoid damage to the tester due to battery leakage;
All the surfaces of articles can be used, and can be tested wherever they can be collected.